 |  | 


This unusual cremone bolt is used to lock a cabinet door. The entire cremone bolt is concealed except for the keyhole on the exterior of the door.
Two turns of the included key extend the rods 11mm (7/16") in each direction.
Made of lightweight plain steel.
Provided with 2 end guides, 2 surface strikes, 2 mortice strikes, one 1500mm rod, one key, cremone bolt mechanism, cremone bolt cover and various screws and nails.
Rod measures 3/8" wide and 3/16" thick by 1500mm long. Rod is cut into 2 lengths to suit up to 61" opening.
Mechanism measures 4-5/16" high x 15/16" wide x 7/16" thick.
End guides are 1-1/4" wide x 1-1/8" tall.
Surface strikes measure 15/16" x 3/8".
Mortise strikes measure 1-1/4" x 9/16".
Key measures 3" long. Suitable for door up to 1-1/4" thick.
Tamper resistant screws require a #0 square drive bit to install. (Sold below.)
Exterior keyhole trim not provided.
Made in France.
|
 | Extra Rod Extra 1500mm rod extends cremone additional 58".

|  |  | |  |  | .
|  |  | .
|  |  | .
|  |  | .
|  |  | .
|  |
|