Projection including lever: 7/8".
The small projection of this cremone bolt makes it ideal for windows with screens and other unusual applications.
Box size 4-5/16" x 1-3/16"
Provided with two one meter half round rods and 4 plain guides.
Rod width 1/2".
Provided with 1 each of universal, mortise, surface and angle strikes.
Shown is Polished Brass finish. Available in 9 finishes. See link to Gruppo Romi Finish Guide below. Choose desired finish from popup menus below when ordering.
Made in Argentina.
|Larger Version (#1880)Turning the lever almost 180 degrees retracts each rod 5/8". Suitable for doors or windows up to 98-1/16". Longer rods available special order.|
Shown in satin nickel.
Rod width 11/16".
Box size 1-7/16" x 5-7/32".
|Strike PlatesFor a inswinging door, the top strike would generally be a surface strike. If the casing is not flush with the door, the surface strike is cut into the casing. This may not seem elegant at first, but remember you want to hide the end of the top rod.|
The alternate to a surface strike is an universal strike. This would be prefered if the casing is very thick.
For a door with a wood threshold, the bottom strike would be a mortise strike.
For a outswinging door, the top strike would be a angle strike mounted into the door stop.
For an outswinging window with stops at the top and bottom, you would need an angle strike for the top and bottom.
For an inswinging window, you may want any combination of surface strikes and mortise strikes.
Remember, you are getting 4 strike plates with your order of which you will only use 2.