Extra Short 2" Backset for Deadbolt

Extra short 2 inch backset deadbolt for use with some single or double cylinder deadbolts.

Works with Emtek deadbolts and some others. Does not work with Kwikset. May not work with Emtek electronic deadbolts.

For Emtek single cylinder deadbolts, we suggest replacing the standard tailpiece on the cylinder with our thicker extra long tailpiece for best operation. Tailpiece will need to be cut to the proper length. Please note: when removing the cap from the rear of the cylinder, never insert the key until the cap is replaced.

Photos: Satin nickel finish. Emtek 2-3/8" backset compared to our 2" backset. Emtek cylinder with standard tailpiece. Emtek cylinder with replacement tailpiece installed.

Includes: 2" backset latch, faceplate, strikeplate, strikeplate reinforcer, dust box, strikeplate reinforcer screws, faceplate screws, strikeplate screws, and installation template.

Dimensions:
Backset (front of faceplate to center of hub): 2"
Maximum overall length of latch (without faceplate): 3.09"
Latch body diameter: 0.96"
Throw of deadbolt: 0.84"
Faceplate size: 2.28" tall x 1.02" wide x 0.05" thick
Strikeplate size: 2.76" tall x 1.13" wide x 0.05" thick
Strike reinforcer size: 2.73" tall x 1.13" wide x 0.12" thick
Dustbox size: 2.66" tall x 1.07" wide x 1.02" deep
Strike reinforcer screws: 3" philips wood screws
Faceplate/strikeplate screws: 0.75" philips wood screws
Edge bore: 3-1/4" deep
Hub shape: two 0.29" tall x 0.1" wide perpendicular rectanglar cutouts with 0.2" diameter circular cutout in center