Small Bore 2" Backset Double Cylinder Deadbolt

These are the perfect deadbolts for narrow stile doors.

These deadbolts are double cylinder, meaning they require a key on both sides. The same key is used on each side.

They require only a small 1-1/2" bore to be drilled in the door, so the door will remain strong even for doors with narrow stiles.

The minimum stile width is 3-1/4". The minimum door thickness is 1-1/4".

There are three style/finish combinations available, as shown. Offered here are Contemporary Polished Brass, Lacquered deadbolts, Traditional Oil-Rubbed Bronze deadbolts, and Contemporary Satin Nickel deadbolts.

Collars may be used optionally to match style preferences and door thickness. Provided with all necessary fasteners as well as strike plate, dust box, and two copies of the key. The main mounting screws have break off points that can be used for thinner doors.

Please call 215-247-0945 if you need modifications.

After installation, test each side of the deadbolt. If one side does not work, remove the deabolt, rotate the tailpieces 90 degrees, and reinstall.

7/8" projection with collar. 5/8" projection without collar. 2-3/16" diameter cylinder ring. 2-5/16" x 1" faceplate. Standard Schlage compatible keyways. Can be rekeyed to any Schlage key.