Sale
Sale
Small Cremone Bolt with Egg-Shaped Knob in Oil-Rubbed Bronze
Gruppo Romi
$550.00
$385.00
(No reviews yet)
Write a Review
Gruppo Romi
Small Cremone Bolt with Egg-Shaped Knob in Oil-Rubbed Bronze
Most popular oil-rubbed bronze egg-shaped cremone in a smaller size suitable for windows and cabinets up to 84" tall.
See the larger model for doors here. Also available in Polished Brass, Lacquered; Polished Brass, Unlacquered; Satin Brass; Polished Nickel; and Satin Nickel. Extra strikeplates may be ordered.
Made in Argentina.
For outswinging windows make sure knob can turn 90 degrees without hitting window stop or pinching fingers.
Dimensions:
> Box size 4-5/16" tall x 1-1/4" wide x 2-5/16" total projection.
> Knob 2-5/16" tall x 1.32" wide.
> Upper rod measures 43-1/4".
> Lower rod measures 39-3/8".
> Rod width 1/2".
> Knob turns clockwise almost 180 degrees retracting rod 5/8" at each end. Maximum extended length 84-3/4"
> This cremone uses the same part for the rod guides and surface strikes. Each cremone is provided with 5 of this part. For the 1200 (smaller) series, the rod guide/surface strike measures 1-1/4" wide and 13/16" tall.
> Provided with 1 each of universal, mortise and angle strikes.
The universal strike for the 1200 (smaller) series measures 1-1/2" wide and 1-1/16" deep.
> The mortise strike for the 1200 (smaller) series measures 1-1/2" wide x 9/16" deep.
> The angle strike for the 1200 (smaller) series measures 1-1/2" wide x 13/16" deep with a 5/16" lip. Angle strikes are used on outswinging applications.
STRIKE PLATES
Shown are a surface strike/rod guide, universal strike, mortise strike and angle strike. For an inswinging door or window you would generally use either a surface strike or an universal strike at the top. For an outswinging door or window you would generally use an angle strike at the top. Generally, a mortise strike is used at the bottom. Each cremone is packaged standard with one of each type of strike.
Most popular oil-rubbed bronze egg-shaped cremone in a smaller size suitable for windows and cabinets up to 84" tall.
See the larger model for doors here. Also available in Polished Brass, Lacquered; Polished Brass, Unlacquered; Satin Brass; Polished Nickel; and Satin Nickel. Extra strikeplates may be ordered.
Made in Argentina.
For outswinging windows make sure knob can turn 90 degrees without hitting window stop or pinching fingers.
Dimensions:
> Box size 4-5/16" tall x 1-1/4" wide x 2-5/16" total projection.
> Knob 2-5/16" tall x 1.32" wide.
> Upper rod measures 43-1/4".
> Lower rod measures 39-3/8".
> Rod width 1/2".
> Knob turns clockwise almost 180 degrees retracting rod 5/8" at each end. Maximum extended length 84-3/4"
> This cremone uses the same part for the rod guides and surface strikes. Each cremone is provided with 5 of this part. For the 1200 (smaller) series, the rod guide/surface strike measures 1-1/4" wide and 13/16" tall.
> Provided with 1 each of universal, mortise and angle strikes.
The universal strike for the 1200 (smaller) series measures 1-1/2" wide and 1-1/16" deep.
> The mortise strike for the 1200 (smaller) series measures 1-1/2" wide x 9/16" deep.
> The angle strike for the 1200 (smaller) series measures 1-1/2" wide x 13/16" deep with a 5/16" lip. Angle strikes are used on outswinging applications.
- Finish:
- Oil-Rubbed Bronze
-
-
Sale
-
Sale
-
Sale
-
Sale
