
Stainless Steel Radiator Humidifier
KilianTo get even lower prices, purchase items in bulk!
- Buy 2 - 3 and pay only $29.99 each
- Buy 4 or above and pay only $28.99 each
Add gentle humidity to dry winter air with this classic radiator humidifier, modeled after a now-obsolete American design. Simply insert the tank into the end of a radiator and fill with water—as the radiator heats, the water gradually evaporates into the room.
-
Made from a single folded sheet of stainless steel for a clean, traditional look*
-
Holds approximately one quart of water
-
No electricity or filters required
-
Best for use with hot radiators in very dry air
This is a partially handmade item, manufactured in China using a vintage design. Ideal for anyone seeking a low-tech, time-tested way to relieve winter dryness.
Please note: These humidifiers perform best when radiators reach high temperatures. On lukewarm radiators, evaporation may be slow.
RECOMMENDATION
For houses with small children we recommend taping the exposed edges with electrical tape.
DIMENSIONS
19" long x 4-1/2" tall.
1/2" insert width x 6-7/8" reservoir width.
Requires a 1/2" minimum width slot in the end of the radiator. Will not fit radiators with end slots less than 1/2".
MORE INFORMATION
*These humidifiers are modeled after a classic American humidifier. The classic American humidifiers were manufactured from galvanized steel sheet metal and they would definitely get rusty, so much in fact, that they would rust through. Our humidifiers are made out of 316 stainless steel which will never rust through. We still find that they sometimes get rust stains. Whether this is the result of minerals in the water, the result of the properties of the stainless steel once it is bent, or residues of the machines they were made on, we don't know. However, we are confident these will never rust all the way through, as the antique ones did all too quickly.
DEALERS
Dealer inquiries invited minimum order 24 pcs.
Add gentle humidity to dry winter air with this classic radiator humidifier, modeled after a now-obsolete American design. Simply insert the tank into the end of a radiator and fill with water—as the radiator heats, the water gradually evaporates into the room.
-
Made from a single folded sheet of stainless steel for a clean, traditional look*
-
Holds approximately one quart of water
-
No electricity or filters required
-
Best for use with hot radiators in very dry air
This is a partially handmade item, manufactured in China using a vintage design. Ideal for anyone seeking a low-tech, time-tested way to relieve winter dryness.
Please note: These humidifiers perform best when radiators reach high temperatures. On lukewarm radiators, evaporation may be slow.
- Shipping:
- Typically ships within 24 hours.
Reviews
-
Stainless Steel Radiator Humidifier
I was delighted to find that such radiator humidifiers are available again and this model is made with stainless steel. I bought 10 of them. I have no reason to not to expect that they will last for years.
-
Tight fit
Our house is populated with antique ARCO radiators, and these SS humidifier inserts would not slide into them without a substantial amount of hammering. They seem to be working, although because they don't hold very much water, they have to be refilled fairly often. I also have found it necessary to cover the humidifier 'mouth' with some aluminum screen to keep things from falling in and disappearing, and to keep our dogs from drinking them dry...
-
Radiator Humidifiers
I bought 8 of these for my home and have one in every room with a radiator that could hold one. Just be careful filling because they can tip if too full.
-
humidifier
No fuss, no muss. Easy,peasy.
-
Radiator humidifier
Good quality, does a good job
-
Excellent
Excellent
-
Excellent
Excellent
-
Excellent
Unique and durable hardware products sold at fair prices and delivered quickly. Thank you
-
Excellent
Great! Wish shipping was less expensive considering the quantity I purchased. Would buy again.