Von Morris Locking Cremone Bolt in Distressed Oil-Rubbed Bronze

Von Morris / Eric Morris & Company
SKU:
EM-DOB

Call 215-247-0945 for pricing

(No reviews yet)

This is a handsome cremone bolt in distressed oil-rubbed bronze finish. Shown with Baldwin's 5190 lever.

This is a locking cremone bolt that uses a standard pin tumbler key.

Can be re-keyed to any Schlage or Baldwin key.

Available in many different finishes including Polished Brass Lacquered, Polished Brass Unlacquered, Lifetime Polished Brass, Oil-Rubbed Bronze, Satin Nickel, Polished Nickel, Satin Chrome, Polished Chrome, etc. Many finishes are available for quick shipment.

Available with a variety of knobs and levers.

Function: Turning outside key or small inside turn knob prevents operation of cremone. Turning outside key or small inside turn knob again frees cremone for operation.

Cremone mechanism is mounted in middle of door with one rod guide at the top of door and one rod guide at the bottom of door. Special concealed plates midway prevent rods from rattling.

Provided standard with 2 mortise strikes and 2 universal strikes. For outswinging doors optional angle strikes are available.

Visible on exterior of door are rim cylinder on top and knob or lever below.

Mechanism Size: 10" high x 1-7/16" wide.

Rods for 7 foot doors each measure 5/8" wide x 5/16" thick x 40-1/4" long. Rods may be shortened as needed. Rods for taller doors available.

Current Stock:

This is a handsome cremone bolt in distressed oil-rubbed bronze finish. Shown with Baldwin's 5190 lever.

This is a locking cremone bolt that uses a standard pin tumbler key.

Can be re-keyed to any Schlage or Baldwin key.

Available in many different finishes including Polished Brass Lacquered, Polished Brass Unlacquered, Lifetime Polished Brass, Oil-Rubbed Bronze, Satin Nickel, Polished Nickel, Satin Chrome, Polished Chrome, etc. Many finishes are available for quick shipment.

Available with a variety of knobs and levers.

Function: Turning outside key or small inside turn knob prevents operation of cremone. Turning outside key or small inside turn knob again frees cremone for operation.

Cremone mechanism is mounted in middle of door with one rod guide at the top of door and one rod guide at the bottom of door. Special concealed plates midway prevent rods from rattling.

Provided standard with 2 mortise strikes and 2 universal strikes. For outswinging doors optional angle strikes are available.

Visible on exterior of door are rim cylinder on top and knob or lever below.

Mechanism Size: 10" high x 1-7/16" wide.

Rods for 7 foot doors each measure 5/8" wide x 5/16" thick x 40-1/4" long. Rods may be shortened as needed. Rods for taller doors available.