Bartley Gel Stain 1/2 Pint
Bartley
$17.99
Easy wipe-on application. Greater coverage than liquids. No messy runs or drips.
No sanding between coats.
Dry to the touch in minutes!
The easy way to stain Unfinished Furniture, Fiberglass Doors, Wood Trim and Floors.
Acclaimed by professionals and amateurs for their ease and results!
STEP ONE
Start with a clean, well sanded surface. With a small cloth, apply a generous coat of Bartley Gel Stain to an area no larger than 6-8 square feet. With a clean cloth or soft paper towel, immediately wipe off the excess with the grain until the color is uniform and free of smudges. The newly stained surface should be nearly dry to the touch. Your first coat of stain is done! There are no runs, no drips, and no unpleasant odors!
STEP TWO
For a darker, richer tone, apply a second coat of stain. Up to 3 coats will add significant depth and richness of color. Allow 6 hours between coats. One of the best features about Bartley finishes is there is no sanding between coats. It couldn't be easier!
STEP THREE
After staining, apply two or three coats of Bartley's Gel Varnish for a beautiful hand-rubbed look. Now step back and admire your results!
INTERMIXING STAINS
AND VARNISH
Bartley Gel Stains can be intermixed in any combination to create an almost infinite number of colors. The Bartley Gel Varnish can be mixed with the stains to make lighter colors.
OVERSTAINING
Even more beautiful tones can be acheived by staining with one color, allowing it to dry for 6 hours, and then overstaining with a different color. For example, using Brown or Dark Brown Mahogany for the first coat followed by Pennsylvania Cherry will result in reddish brown tones. Pennsylvania Cherry overstained with Jet Mahogany will create a rich Mahoghany color. Because Gel Stains are semi-transparent, the overstaining creates a different look than had the same colors been mixed in a can and then applied. Overstaining has many possibilities. Try it!
COMPATIBILITY WITH
OTHER FINISHES
Bartley Gel Stains can be topcoated with most varnishes, polyurethanes, water base finishes, and lacquers, providing the stains have dried thoroughly. The Gel Varnish can be used to topcoat other stains. To be safe, test an area that will not be visible.
Easy wipe-on application. Greater coverage than liquids. No messy runs or drips.
No sanding between coats.
Dry to the touch in minutes!
The easy way to stain Unfinished Furniture, Fiberglass Doors, Wood Trim and Floors.
Acclaimed by professionals and amateurs for their ease and results!
- Shipping:
- Typically ships within 24 hours.
Reviews
-
Great Merchant
Immediate response by e-mail and fast shipping.
-
Good
Good
-
Excellent
Helpful phone staff, knowledge of info. re: products beyond the norm, prompt shipment of exact order. AA Excellent
-
Excellent
Great prices, responsive and fast shipping. I will buy from them again.
-
Excellent
Excellent
-
Excellent
Excellent
-
Excellent
very prompt service. Shipping rate more than reasonable
-
Excellent
Excellent